Filtering in many different forms of production, service and a very important additional factor. Without proper filtration, pollution, degradation and other system problems may occur. Obviously, a screen with the correct filter is very important. However, there are filters in selecting the right solution for some of the important considerations. Filter design and construction of different elements should be understood in order to ensure that you can find the most suitable for your specific needs.

PTFE open meshes

Needs of different types of filter requires a different shape for the end of the wire filter. Some applications require PTFE open meshes simple plate held in place by a metal collar. However, there are many applications that require a very specific shape, funnel, round, oval, circular shape and a dent is common. There are also many different applications require custom shaped filter.

The type of filter screen

In addition to producing a variety of different filter shapes and sizes, your suppliers also need to be able to provide you with a screen type that suits your needs. For example, a metal mesh filter material can be of different diameter and shape with several openings. You need to choose the right shape and diameter to fit your filtration needs. As an example, if you are filtering fine particles from the liquid, then you will need to use a small aperture mesh filter.

Surface

Another significant factor in the creation of high-quality metal mesh filter products is the problem of surface area. Simple filters have a limited surface area - they tend to be flat, or with a simple shape within the filter housing assembly. However, there are some larger filter surface area needed for many applications. In these applications, the filter network will require a specific shape to meet different needs.

Particle retention

PTFE open meshes which is one of the most important when buying any metal mesh filter considerations. How to retain particles are small particles passed through the mesh as a measure, and in microns, usually measured. Having low particle retention filter will allow larger particles through a plurality of particles to maintain a high level. Obviously, this would be considered a specific application, you need to make sure you choose the correct filter for each case.